Ditch-witch SK350 Manuel d'utilisateur télécharger pdf (Page 30)

SK350 Operator’s Manual Prepare - 29

Connect Attachment

CMW

Connect Attachment

Attachment

1. Position attachment on level surface with enough

space behind it to accommodate unit.

2. Ensure that lock pin handles (shown) on mount

plate are turned away from center of attachment.

3. Start engine.

4. Tilt mount plate (2) forward.

5. Position mount plate in the upper lip of the receiver

plate (1) on attachment.

6. Raise lift arms while tilting back mount plate.

7. Ensure that all controls are in neutral position.

8. Apply parking brake.

9. Turn ignition switch off and remove key.

10. Rotate lock pin handles toward center of mount

plate to secure attachment to lift plate.

IMPORTANT: Use only Ditch Witch-approved attachments. Attachments can change the stability and

operating characteristics of the unit.

IMPORTANT: Before connecting attachment to unit, ensure that mount and receiver plates are free of

dirt and debris.

IMPORTANT: Attachment should be raised

enough to clear the ground. Mount plate

should be tilted back fully.

NOTICE: To ensure proper connection, verify

that bottoms of lock pins are visible under

attachment receiver plate (shown).

t05om022c.eps

t05om026c.eps

t05om027c.eps

1 2 ... 25 26 27 28 29 30 31 32 33 34 35 ... 76 77

Pas de commentaire

Ditch-witch SK350 Manuel d'utilisateur Page 30